基于柠檬酸-铕纳米配位聚合物构建荧光探针快速检测汤煲中5’-肌苷酸含量

基于柠檬酸-铕金属有机纳米配体聚合物（citrate/europium lanthanide coordination polymer nanoparticles，Cit/Eu LCP NPs）构建快速检测肉品汤煲中5’-肌苷酸（inosine-5’-monophosphate，5’-IMP）的荧光探针。研究结果表明，5’-IMP对Cit/Eu?LCP?NPs有良好的荧光猝灭作用。在最佳条件下，该荧光探针在5’-IMP?2.5～200?μg/mL的质量浓度范围内呈现出良好的线性关系，检出限为0.17?μg/mL，且具备良好的抗干扰、稳定性和重复性。为了验证方法可行性，将该方法应用于实际鸡汤样品中的5’-IMP检测，测得加标回收率为97.85%～103.95%，可为快速检测肉品汤煲中5’-IMP提供新的思路和方法。     

Fabrication and optical properties of transparent LaErZr2O7 ceramic with high excess contents of La and Er

In this study, transparent LaErZr₂O₇ ceramic with high excess La and Er contents (nominally La_1.28Er_1.28Zr₂O_7.84) was successfully prepared by vacuum sintering at 1850?°C for 6?h using nanosized powder. The XRD, SEM, EDX and TEM results reveal that the single pyrochlore phase in the powder sample transforms to the coexistence of La-rich pyrochlore phase and Er-rich defect fluorite phase after high temperature sintering. The high excess amounts of La and Er favor the formation of pyrochlore structure. Despite the coexistence of two phases, the sample with 1?mm thickness shows excellent in-line transmittance in the visible to mid-infrared region (as high as 81% at 1100?nm). The upconversion and infrared emission under 980?nm exciting were measured and discussed as well.     

Efficient hydrogen evolution by liquid phase plasma irradiation over Sn doped ZnO/CNTs photocatalyst

In this study, the liquid phase plasma (LPP) was irradiated over pure zinc oxide (ZnO), strontium (Sn) doped ZnO, and Sn doped ZnO/CNTs photocatalysts for hydrogen evolution from pure water and from aqueous solution of water-methanol. The possible relationship between hydrogen evolution and optical emissions from LPP for activation of ZnO based photocatalysts was revealed. The role of carbon nanotubes (CNTs) as a support material for improved photocatalytic hydrogen evolution was also investigated in this study. The photocatalytic hydrogen evolution from water mixed methanol under LPP irradiation was compared with pure water splitting. The photolysis produced negligible amount of hydrogen due to minimal photodecomposition of water molecules under LPP irradiation. The plasma born reactive species also played crucial role in photolysis. However, the hydrogen evolution rate increased significantly in the presence of ZnO photocatalyst. Further improvement in hydrogen evolution rate was noticed on Sn doping of ZnO and compositing with CNTs. The highest hydrogen evolution rate of 11.46 mmh⁻¹g⁻¹ from water mixed methanol was achieved with Sn doped ZnO/CNTs photocatalyst. This hydrogen evolution rate from water-methanol solution was 9 times higher than from the splitting of pure water. This hydrogen evolution rate is attributed to excessive production of hydroxyl radicals, red shift in optical band gap of Sn doped ZnO/CNTs photocatalyst, slow electron-hole recombination and fast decomposition of methanol as sacrificial reagent.     

Additive manufacturing of bipolar plates for hydrogen production in proton exchange membrane water electrolysis cells

Water electrolysis is a process that can produce hydrogen in a clean way when renewable energy sources are used. This allows managing large renewable surpluses and transferring this energy to other sectors, such as industry or transport. Among the electrolytic technologies to produce hydrogen, proton exchange membrane (PEM) electrolysis is a promising alternative. One of the main components of PEM electrolysis cells are the bipolar plates, which are machined with a series of flow distribution channels, largely responsible for their performance and durability. In this work, AISI 316L stainless steel bipolar plates have been built by additive manufacturing (AM), using laser powder bed fusion (PBF-L) technology. These bipolar plates were subjected to ex-situ corrosion tests and assembled in an electrolysis cell to evaluate the polarization curve. Furthermore, the obtained results were compared with bipolar plates manufactured by conventional machining processes (MEC). The obtained experimental results are very similar for both manufacturing methods. This demonstrates the viability of the PBF-L technology to produce metal bipolar plates for PEM electrolyzers and opens the possibilities to design new and more complex flow distribution channels and to test these designs in initial phases before scaling them to larger surfaces.     

Clinical significance of contact lens related changes of ocular surface tissue observed on optical coherence images

PurposeTo investigate the relationship between the real contact lens imprint into the conjunctival tissue, observed by optical coherence tomography (OCT) and conjunctival staining and contact lens wearing comfort.Methods17 participants (mean age = 26.6 SD ± 3.6 years; 7 females) were fitted with three different contact lenses base curves of the same silicone hydrogel custom lens type (Visell 50; Hecht Contactlinsen, Au, Germany) in a randomised order. One lens was optimally fitted according to the manufacturer's recommendation, one fitted 0.4 mm flatter and one fitted 0.4 mm steeper. After 4 h of lens wear the contact lens edge in the area of the conjunctiva was imaged nasally and temporally using OCT (Optovue iVue SD-OCT). To correct the artefact due to optical distortion with OCT, the imprint of all worn lenses was measured on a glass plate afterwards. Conjunctival staining in the limbal region after 4 h of lens wear was classified using the CCLRU Grading Scale. Comfort scoring was based on visual analog scales from 0 (very poor) to 100 (excellent).ResultsThe mean conjunctival imprint of all contact lens edges was 32.0 ± 8.1 μm before and 7.3 ± 6.5 μm after distortion correction of the OCT images. The distortion corrected conjunctival imprint with the 0.4 mm steeper lens (11.5 ± 6.2 μm) was statistically significantly greater compared to the optimally fitted lens (6.5 ± 5.9 μm) (One-way ANOVA followed Tukey-test; p = 0.017) and greater compared to the 0.4 mm flatter lens (3.9 ± 5.3 μm) (p < 0.001). There was no statistically significant difference between the optimally fitted lens and the 0.4 mm flatter lens (p = 0.209). The nasally measured imprint (11.4 ± 9.0 μm) was significantly greater than the temporally measured (3.3 ± 7.6 μm) (p < 0.001). There was no statistically significant correlation between the amount of conjunctival imprint and the graded conjunctival staining (p = 0.346) or the wearer’s comfort (p = 0.735).ConclusionsContact lens edges imaged by OCT exhibited displacement artefacts. The observed conjunctival imprints are a combination of real conjunctival compression and artefacts. A deeper imprint of the contact lens into the conjunctiva caused by a steeper base curve was not related to clinically significant staining or changes in comfort after 4 h of lens wear. The observed differences between nasal and temporal imprint are likely to be caused by variations of conjunctival thickness and the shape of the underlying sclera.     

一种5 重real-time PCR筛查转基因水稻方法的建立

以转基因水稻中最常用的CaMV35S启动子、NOS终止子、Cry1Ab/Ac基因、HPT基因及SPS水稻内标基因为研究对象，利用5 种不同的荧光信号（FAM、HEX、Taxas Red、Cy5、Cy5.5）进行多重实时聚合酶链式反应（real-time polymerase chain reaction，real-time PCR）检测方法的研究。通过引物组合筛选、反应体系优化、特异性测试、灵敏度测试、适用性测试等一系列实验，建立了5 重real-time PCR方法，灵敏度可达0.032%。此方法具有灵敏度高、结果准确、通量大等优点，可实现水稻中转基因成分的快速、高效检测。     

起·承·转·合 ——解读巍宝山长春洞空间布局的结构章法

长春洞是巍宝山保存最完整的宫 观，虽占地不到两亩①，却在有限的空间中 创造出九楼十院的空间格局。本文以长春洞 空间布局序列为研究对象，从知觉体验的 连续性入手，提出了空间变化对参观者情感 的影响，论述了在建筑空间布局序列中参观 者知觉体验逐层递进的控制机制，探讨了以 “起、承、转、合”为结构，以“知觉体验”为 章法的动态空间布局设计手法，希望为道教 建筑空间与其他超越日常的精神空间的研 究提供启示。     

Effect of energy transfer and local crystal field perturbation on the thermometric sensitivity of Ga-Tb-Eu ternary emission system

A series of optical thermometers based on Eu³⁺/Tb³⁺ doped Y₃Ga₅O₁₂ with self-excited GaO₆ group phosphors were designed through controllable energy transfer and local crystal field perturbation simulated using the density-functional theory approach and related structures. Color-tunable properties of the phosphors could be achieved through controllable energy transfer. In addition, the thermometers exhibited superb temperature sensitive properties. Over the entire temperature range (298.15–598.15 K), maximum values of the absolute sensitivity and relative sensitivity are 0.028 K^?1 and 7.03 %K^?1, respectively. Meanwhile, the thermometer has outstanding resolution (ΔT = 0.0043 K) and repeatability (98.37%).     

Research on the effects of surface modification of ceramic powder on cure performance during digital light processing (DLP)

Digital light processing (DLP) is one of the most important additive manufacture technologies to fabricate ceramic parts with complex geometries. Compared with pure photosensitive resin, the cure performance of ceramic suspensions is obviously different due to the optical property change after the addition of ceramic powders. In this paper, a unique oxidation process was used to modify the optical properties of nitride powders including AlN and Si₃N₄. The properties of oxidized ceramics were investigated and the cure performance of ceramic suspensions was then characterized. The effect of oxidation time on cure performance was evaluated. The results showed that for AlN, oxidation process leads to the smaller cure depth and smaller excess cure width as compared with non-oxidized AlN and for Si₃N₄, oxidation process leads to the larger cure depth and larger excess cure width as compared with non-oxidized Si₃N₄, indicating that both refractive index and light absorbance of ceramic powders have obvious effects on cure behaviors. Additionally, the cure behavior of oxidized ceramic suspension in this study shows that the relationship of cure depth vs. incident energy agrees well with Beer- Lambert model, but the excess cure width vs. incident energy is not consistent with quasi Beer-Lambert model due to the nature of digital micromirror device (DMD).     

Suppression of Hypoxia-Inducible Factor 1α by Low-Molecular-Weight Heparin Mitigates Ventilation-Induced Diaphragm Dysfunction in a Murine Endotoxemia Model

Mechanical ventilation (MV) is required to maintain life for patients with sepsis-related acute lung injury but can cause diaphragmatic myotrauma with muscle damage and weakness, known as ventilator-induced diaphragm dysfunction (VIDD). Hypoxia-inducible factor 1α (HIF-1α) plays a crucial role in inducing inflammation and apoptosis. Low-molecular-weight heparin (LMWH) was proven to have anti-inflammatory properties. However, HIF-1α and LMWH affect sepsis-related diaphragm injury has not been investigated. We hypothesized that LMWH would reduce endotoxin-augmented VIDD through HIF-1α. C57BL/6 mice, either wild-type or HIF-1α–deficient, were exposed to MV with or without endotoxemia for 8 h. Enoxaparin (4 mg/kg) was administered subcutaneously 30 min before MV. MV with endotoxemia aggravated VIDD, as demonstrated by increased interleukin-6 and macrophage inflammatory protein-2 levels, oxidative loads, and the expression of HIF-1α, calpain, caspase-3, atrogin-1, muscle ring finger-1, and microtubule-associated protein light chain 3-II. Disorganized myofibrils, disrupted mitochondria, increased numbers of autophagic and apoptotic mediators, substantial apoptosis of diaphragm muscle fibers, and decreased diaphragm function were also observed (p < 0.05). Endotoxin-exacerbated VIDD and myonuclear apoptosis were attenuated by pharmacologic inhibition by LMWH and in HIF-1α–deficient mice (p < 0.05). Our data indicate that enoxaparin reduces endotoxin-augmented MV-induced diaphragmatic injury, partially through HIF-1α pathway inhibition.